NEWS

update:2012-06-18NO.: DOC120603-01

LEO-MTS Received an Updated Accreditation by U.S. CPSC for ASTM F963-11

It is our pleasure to announce that CPSC (Consumer Product Safety Commission) has approved LEO-MTS’ (Heshan Leo Metrology and Testing Services Co. Ltd) application for registration of ASTM F963-11 on June, 12, 2012. This accreditation recognizes our lab’s ability to test in compliance with ASTM F963-11. Testing scope as below:

  • 16 CFR Part 1303, Lead Paint
  • 16 CFR Part 1303 (CPSC–CH–E1003–09 or CPSC–CH–E1003–09.1), Lead Paint Regulation
  • 16 CFR Part 1303 (ASTM F2853-10), Lead Paint Regulation
  • 16 CFR Part 1501, Small Parts Regulation
  • 16 CFR Part 1510, Rattles
  • CPSC-CH-C1001-09.3 and/or GB/T 22048-2008, Determination of Phthalates
  • CPSC-CH-E1001-08 and/or CPSC-CH-E1001-08.1, Lead in Children's Metal Jewelry
  • CPSC-CH-E1001-08 and/or CPSC-CH-E1001-08.1, Lead in Children's Metal Products
  • CPSC-CH-E1002-08 and/or CPSC-CH-E1002-08.1, Lead in Non-Metal Children's Products
  • 4.3.5.1(2) (ASTM F963-11), Surface Coating Materials – Soluble Test for Metals
  • 4.3.5.2 (ASTM F963-11), Toy Substrate Materials
  • 4.6 (ASTM F963-11), Small Objects (except labeling and/or instructional literature requirements) (except 4.6.2)
  • 4.7 (ASTM F963-11), Accessible Edges (except labeling and/or instructional literature requirements)
  • 4.8 (ASTM F963-11), Projections
  • 4.9 (ASTM F963-11), Accessible Points (except labeling and/or instructional literature requirements)
  • 4.10 (ASTM F963-11), Wires or Rods
  • 4.11 (ASTM F963-11), Nails and Fasteners
  • 4.12 (ASTM F963-11), Plastic Film
  • 4.14 (ASTM F963-11), Cords and Elastics in Toys (except 4.14.4)
  • 4.17 (ASTM F963-11), Wheels, Tires, and Axles
  • 4.18 (ASTM F963-11), Holes, Clearances, and Accessibility of Mechanisms
  • 4.19 (ASTM F963-11), Simulated Protective Devices (except labeling and/or instructional literature requirements)
  • 4.22 (ASTM F963-11), Teethers and Teething Toys
  • 4.23.1 (ASTM F963-11), Rattles with nearly Spherical, Hemispherical, or Circular Flared Ends
  • 4.24 (ASTM F963-11), Squeeze Toys
  • 4.27 (ASTM F963-11), Stuffed and Beanbag-Type Toys
  • 4.32 (ASTM F963-11), Certain Toys with nearly Spherical Ends
  • 4.35 (ASTM F963-11), Pompoms
  • 4.36 (ASTM F963-11), Hemispheric-Shaped Objects
  • 4.38 (ASTM F963-11), Magnets(except labeling and/or instructional literature requirements)
  • 4.39 (ASTM F963-11), Jaw Entrapment in Handles and Steering Wheels

For more information, please browse CPSC website:
http://cpsc.gov/cgi-bin/LabSearch/ViewLab.aspx?LabID=1331

In the future, LEO-MTS will continue to review and enlarge the scope of its services, as well as its compliance with international requirements, so as to provide timely product safety information, advice and a full test program for the whole Group, customers and relevant parties.

 

Solution
My Profession Your Excellence!
• Heshan Leo Metrology and Testing Services Co. Ltd.(LEO-MTS) can help to improve products quality for you, your supplier and your client.
To more information, please contact
Heshan Leo Metrology and Testing Services Co. Ltd.

0750-8862565

0750-8768244

MTS@Leo-MTS.com

http://www.leo-mts.com http://www.leo-mts.cn

more info
Copyright © 2011 HESHAN LEO METROLOGY AND TESTING SERVICES CO.LTD. All Rights Reserved

Disclaimer:Leo-MTS has tried all reasonable efforts to ensure the accuracy of information, however the information provided should not be relied upon as legal advice or regarded as a substitute for legal advice; The reader should exercise his own care and judgment before replying on this information in any important matter.